Blueair ECO10 Air Purifier

The Blueair ECO10 has a digital display system and remote control, providing you with feedback about particle detection, air purifier speed and timer operation. You can change the speed settings with your remote control, making operating your Blueair ECO10 as convenient and easy as possible.
The Blueair ECO10’s display also features an intelligent filter life indicator and electronic particle and gas sensors, enabling you to see that the unit is effectively removing particle pollution from your home. The display also tells you when it is time to change the filter.

The ECO10 uses Blueair’s patented HEPASilent technology. This filtration technology is a combination of mechanical and electrostatic filtration, and allows the Blueair ECO10 to deliver more clean air at a faster rate with less noise than any other domestic air purifier.
The Blueair ECO10 SurroundAir diffuses the clean air gently through a large area into three different directions, an area six times greater than the average air cleaner. Blueair’s SurroundAir system achieves peak performance without annoying drafts by drawing in dirty air from the sides and bottom and releasing clean, filtered air from the sides and top.
The Blueair ECO10 uses only 10 watts of energy on its highest speed level, making it the most energy friendly air purifier.

Winner of the Excellent Swedish Design Award, the Blueair ECO10 has the sleek and contemporary look that Blueair air purifiers are famous for. It is built with a galvanised steel housing that is impact resistant and easy to clean. The Blueair ECO10 filters consist of non-toxic polypropylene media that is 100% free of harmful triclosan and glass fibers.

The Blueair ECO10, as with all other Blueair air purifiers, uses a Three-Stage Progressive Filter – a filter that resembles having many filters in one.
The filter is made up out of three different levels of millions of ultra thin fibers, and with its ‘lock-in’ design, once captured the particles are not re-released back into your environment, even when the filter is heavily loaded.
The first layers capture larger particles like pollen and dust, and the later layers capture smaller particles like bacteria and exhaust particles.
The ECO10 filter kit includes three particle filters, one for each side that clean air is released from the unit.

Regular air purifier filters are thinner and mostly consist of the same fiber size and material throughout, this leads to them clogging up sooner. However, the unique design of the Blueair ECO10 Three-Stage Progressive Filter resists clogging, and allows the ECO10 to perform longer on its peak performance.

When the filter needs to be replaced (around every six months), just open the lid, take out the old filter and put the new one in. No screws, hooks or tools are needed.