Need Help? Phone us on: 020 3051 7826  
Monday - Friday: 9am to 6pm

IQAir Dental Pro

Infection Control & Broad Chemical Protection for Dentists

The Dental Pro has been designed to remove a wide range of chemical contaminants, including mercury vapours, from dental surgeries and clinics. The Dental Pro is commonly deployed by dentists who are concerned about working in a confined environment that is exposed to airborne pollutants for extended periods.

IQAir Dental Pro

The Dental Pro will remove at least 99% of all airborne particulate, aerosol, allergen and micro-organism contamination, as well as a wide range of chemical contaminants. The Dental Pro gives dentists easy access to an air cleaner that is simple to use and requires no maintenance aside from filter changes. Each Dental Pro is individually tested, certified and guaranteed, and designed and manufactured exclusively in Switzerland.

Chemical Media Spectrum

A selection of chemicals filtered by the Dental Pro is shown below.

  • Acetic acid
  • Acetone
  • Acrolein
  • Acrylonitrile
  • Butadiene
  • Butyric acid
  • Carbon disulfide
  • Chlorine dioxide
  • Cresol
  • Cyclohexanone
  • Diethylamine
  • Dimethylamine
  • Ethanol
  • Ethyl acetate
  • Ethyl acrylate
  • Ethylamine
  • Formic acid
  • Hydrogen chloride
  • Isoprene
  • Isopropanol
  • Mercury
  • Methanol
  • Methyl acrylate
  • Methyl disulfide
  • Methyl ethyl ketone
  • Methyl mercaptan
  • Methyl sulfide
  • Methyl vinyl ketone
  • Methylamine
  • Nitroglycerine
  • Ozone
  • Phenol
  • Skatole
  • Styrene
  • Sulfur trioxide
  • Trichloroethylene
  • Triethylamine
  • Trimethylamine
  • Vinyl chloride

Filtration Stages

IQAir Dental Pro Filtration Stages

The Dental Pro achieves its filtration efficiency over three filtration stages:

1. GC Pre-Filter H11 (S)
Removes particulate contamination before it can reach the activated carbon stage, thus extending filter life.

2. Dental Pro Filter Cartridge Set
5kg of the highest grade granular impregnated activated carbon (AC/4-S) and activated carbon and impregnated alumina (AC/4 + IA/4) is housed in four cylindrical shaped cartridges. The large surface area of the cartridges and the cylindrical shape promotes high system efficiency

3. GC Post-Filter Sleeve Set
The final stage of the three filtration stages adds another HEPA class filter, which stops particles produced as a by-product of stage 2, being released by the system.



99% for particles≥ 0.3 micron (μm)

Airflow Rate:

Speed 1 - 50 m3/h

Speed 2 - 90 m3/h

Speed 3 - 150 m3/h

Speed 4 - 220 m3/h

Speed 5 - 280 m3/h

Speed 6 - 400 m3/h

Room Size:

Up to: 180m3

Noise Level:

LPA =25-57 dB(A) / LWA = 32-67 dB(A)


71 x 38 x 41 cm

Power Usage:

20 to 135 watts



Filter Service Life:

Dental Pro HEPA H11 Class Pre-Filter: 6-12 months

Dental Pro Filter: 12-24 months

Dental Pro Post Filter: 12-24 months

Part Codes

IQAir Dental Pro Air Purifier (Includes Filters)


IQAir Dental Pro HEPA H11 Class Pre-Filter (S)

102 10 12 00

IQAir Dental Pro Filter Cartridge Set

102 40 50 00

IQAir Dental Pro Post Filter Sleeve Set

102 50 10 00

For more information

Contact a member of Commercial Air Filtration’s expert team on 020 3051 7826, or email: