This is a set of the three filters for the IQAir HealthPro 250 air purifier. The Replacement Filter Set consists out of the F1 - PreMax Pre-Filter F8 (S), the F2 - V5-Cell MG Filter and the F3 - HyperHEPA Filter H12/13 (L).
The PreMax Pre-Filter filters out coarse and fine particulate matter. This is important for protecting the fan motor and significantly prolonging the life of the subsequent filters.
The V5-Cell MG Filter controls the broadest range of chemical contaminants (including VOCs) and odours.
The HyperHEPA Filter provides medical grade filtration of fine and ultra-fine particulate matter, such as traffic pollution, bacteria, viruses and sub-micron sized dust particles.
The IQAir PreMax Pre-Filter F8 (S)
Purpose: control of coarse and fine particulate matter; protection of subsequent filters
Media: non-woven glass microfiber, mini-pleated for high-capacity
Efficiency: 55% at 0.3 μm (class F8)
Surface Area: 2.8m2
Filter Number: 1
Dimensions: H 8 x W 33 x D 33 cm
Filter Life: 6-18 months
Country of Manufacture: Switzerland
Art. Number: 102 10 10 00
The IQAir V5-Cell Filter MG
Purpose: control of a wide range of chemical contaminants and odours
Media: MultiGas granulated activated carbon & impregnated activated alumina
Weight: 2.5 kg
Efficiency: absorbs a wide array of gaseous pollutants and odours
Filter Number: 2
Dimensions: H 8 x W 33 x D 33 cm
Country of Manufacture: Switzerland
Filter Life: 1-2 years
Art. Number: 102 18 10 00
The IQAir HyperHEPA Filter H12/13 (L)
Purpose: control of fine and ultra-fine particulate matter
Media: non-woven glass microfiber, hospital-grade Hyper HEPA filter
Efficiency: 99.97% at 0.3 μm (class H12/13)
Surface Area: 5.0m2
Filter Number: 3
Dimensions: H 12 x W 33 x D 33 cm
Country of Manufacture: Switzerland
Filter Life: 1.5-3 years
Art Number: 102 14 14 00
Country of Manufacture: Switzerland
The PreMax Pre-Filter captures pollen, pet, dust mite and mould allergens as well as all other large particle pollution. It thus protects the fan and subsequent filters from large particle pollution and premature loading.
IQAir’s patented V5-Cell filtration provides the best filtration for the broadest range of gas and odour pollution. To effectively capture and retain gases, it is essential to use the right media. The IQAir system provides two types of gas filtration media, one absorbs odours and gases and the other changes pollutants to an oxidised form.
The HyperHEPA filtration technology gives superior airborne particle removal that is tested and certified by an independent third-party lab to effectively filter harmful ultra-fine pollution particles down to 0.003 microns in size. This is 100 times smaller than what is achieved with ordinary air filtration technology and 10 times smaller than a virus. The medical grade HyperHEPA filtration filters a minimum of 99.97% of all particles 0.3 microns or larger.
1. Micro-Particle Filtration
The PreMax Pre-Filter captures all large particle pollution such as: dust, pollen, pet, dust mite and mould allergens. The PreMax Pre-Filter consists of a high-capacity mini-pleat design with inert thermoplastic separators and a CFC-free construction. The media of the filter is a wet laid non-woven glass microfiber and has an efficiency of 55% at 0.3 μm (class F8). The large surface area of the HealthPro 250's Pre-Filter, in combination with the leakage free design of all IQAir air purifiers, protects the fan and subsequent filters from large particle pollution and premature loading.
2. Odour and Gas Elimination
The V5-Cell Wide Spectrum Gas and Odour Filter eliminates Volatile Organic Compounds (VOCs), and destroys harmful chemicals, such as formaldehyde. The V-shaped design of the V5 Cell filter allows the use of 2.5 kg of IQAir's highly efficient gas and odour filter medium. The media consists of a MultiGas granular activated carbon & KMnO4 impregnated alumina - the most effective material to filter out a broad spectrum of gases, chemicals and odours.
3. Industry’s Highest Filtration Rate
IQAir’s patented HyperHEPA clean-room-grade, high-efficiency particulate arresting filtration, which eliminates bacteria and viruses, as well as particulate air pollution from traffic, industry, tobacco smoke and more.
The HyperHEPA Filter has a CFC-free construction and a filtration efficiency of 99.97% for particles down to 0.3 micron and 99.5% for particles down to 0.003 micron. The media is a HEPA class H12/H13 filter with a wet laid glass microfiber, mini-pleat design with inert thermoplastic separators. The large surface area of the HyperHEPA Filter guarantees optimal filtration for up to 2 years under an average pollution level and speed setting.
Need Help? Phone us on: 
Loading...